Fugaremix

renovated grout
Fugaremix
  • easy application
  • the possibility to tint with Fugaremix + Pigment MIX
  • A white single component preparation in a bottle with an applicator tip guaranteeing a high quality coating.
  • The product is based on artificial resins, titanium white, fillers and modifying agents.
  • The raw material composition ensures achieving a coating with high covering power, high degree of white and good adhesion to painted surfaces.
  • Grouts painted with the renovator have high resistance to abrasion and detergent cleaning.
  • A bottle with an applicator tip ensures comfortable usage of the product and the attached sponge ideally removes its excess from tiles.

Storage

Store in tight original packages in the temperature ranging from +5°C to +40°C.

Packaging

A unit carton contains a bottle with an applicator tip of 100 ml, pigment applicator tip and wiping sponge.
A collective carton: 10 pcs.

Shelf life

24 months

Attestations

Hygienic Approval of the Polish National Institute of Hygiene

Videos

Fugaremix - manual

Colouring

Intended use

The preparation designed for renovating cement grout between glazed, terracotta and mosaic tiles with glazed surfaces. It should not be used in the case of clinker or unglazed ceramic tiles.

It ought to be applied on vertical surfaces inside and outside buildings. It perfectly mixes with the Pigment MIX pigments. Thanks to this property, it is easy to reproduce the current colour of grout or to change its colour or shade. The colour selection is facilitated by an approximate colour template placed on the packaging. You can also create your own colours by mixing various pigments.

Application

The renovated grout surface needs to be washed and degreased, especially in the case of kitchen rooms. After the application of cleaning agents, the surface has to be washed with clean water and wait for it dry. In the event of tinting with Pigment MIX pigments, it is recommended to dose pigments with the attached applicator. The recommended maximum quantity of the pigment addition is 10 ml. Mix thoroughly by shaking the bottle for about 1 minute until a uniform colour has been obtained.  In order to renovate white grouts, use the ready-made preparation. Shake the bottle with the preparation and then slightly press the grout with the top-piece of the sponge. Before commencing work, a test should be performed on a small, smooth and clean surface.  Grouts should be painted with the preparation on a surface of about 1 sq. m., then it should be left for about 30 minutes until it dries and finally its excess ought to be removed from tiles with the rough side of the attached sponge. Exceeding the recommended time may result in difficulties with removing the preparation. The drying time is about 2 hours. The product reaches full hardness after 48 hours.

Download the manual.

Promotional materials

Contact

+48 42 213 23 00
+48 42 671 74 05
+48 42 299 68 37
+48 42 209 39 23
biuro@inchem.pl

More