MIX-BUD max
MIX-BUD max is a concentrated pigment in the form of an aqueous dispersion of pigments, with added dispersing-wetting agents and viscosity regulators.
MIX-BUD max does not contain any resins, ethylene glycol, heavy metals, volatile organic compounds (VOCs), or alkylphenol ethoxylates (APEOs).
The formula of MIX-BUD max concentrate is based on selected inorganic and organic pigments with maximum resistance to light, external conditions, alkaline environments, lime, and cement.
The auxiliary agents used ensure that MIX-BUD max concentrate spreads perfectly in dispersion paints, plasters, as well as in cement and/or lime-based building materials, providing a durable and uniform shade.
MIX-BUD max concentrates guarantee consistent and economical solutions. To ensure color accuracy and repeatability, each MIX-BUD max concentrate is tested in our Quality Control Laboratory. Parameters such as density, viscosity, pH, hue, and color strength are tested.
![](https://www.inchem.pl/wp-content/uploads/2024/06/piktogramy-NEW-do-wewANG-150x150.png)
![](https://www.inchem.pl/wp-content/uploads/2024/06/piktogramy-NEW-na-zewANG-150x150.png)
![](https://www.inchem.pl/wp-content/uploads/2024/06/piktogramy-NEW-swiatloodpANG-1024x1024.png)
USAGE
MIX-BUD max pigment concentrate is designed for tinting dispersion paints and plasters (acrylic, silicone, silicate – see color chart) for both interior and exterior applications.
MIX-BUD max concentrate can also be used to color in mass cement and/or lime-based building products such as mortar, concrete screeds, paving stones, cement roof tiles, palisades, etc.
It is suitable for ready-made paints, enamels, and varnishes used indoors and outdoors.
For tinting facade paints, plasters, and concrete.
Eco-friendly.
UV-resistant.
INSTRUCTIONS FOR USE
Before using MIX-BUD max pigment concentrate, thoroughly mix it. Any separation is not a product defect.
Perform a test tinting on a small amount of the product to check compatibility and determine the appropriate ratio.
Measure or weigh the necessary amount of concentrate and slowly add it to the product being tinted, mixing thoroughly by hand or mechanically (using a mixer) until a uniform color is achieved. During mixing, avoid excessive foaming, which can affect application properties.
It is recommended not to exceed 5% of MIX-BUD max concentrate relative to the total mass of the finished product.
Due to the different technologies and raw materials used by various paint and plaster manufacturers, it is advisable to conduct a test on a small quantity of paint or plaster. Colors shown in the color chart are for reference only.
The final color achieved depends on the type and quality of the product being tinted. Absorbency, substrate type and texture, environmental conditions, and lighting can also influence the final color.
COLOR CARD
![](https://www.inchem.pl/wp-content/uploads/2024/06/karta_mix-bud-max_new_pl_2020_2.jpg)
MIX-BUD max concentrate is produced in 24 colors. It is possible to create an unlimited number of colors and shades because MIX-BUD max pigments mix perfectly together. This allows for the creation of custom colors.
Note: Colors marked with a star (*) are not recommended for silicate paints and plasters.
** kolorów oznaczonych gwiazdką nie zalecamy do silikatowych farb i tynków
TO DOWNLOAD
Need other materials? Contact us!