Wall Tile Paint

Wall Tile Paint is a two-component, water-based, satin-finish polyurethane paint. It is characterized by high chemical and mechanical resistance and effectively protects coated surfaces from moisture and all types of dirt. Polyurethane paint successfully secures walls prone to frequent dirt. It does not yellow and is resistant to UV radiation. Designed for decorative and protective painting of both glazed and unglazed ceramic tiles on walls in kitchens and hallways.

  • water-based
  • covering
  • with a beautiful satin finish
  • UV resistant
  • chemically and mechanically resistant
USAGE

Wall Tile Paint is intended for:

  • decorative and protective painting of both glazed and unglazed ceramic tiles on walls in kitchens and hallways

 

Decorative and protective painting of tiles including:

  • glazed tiles
  • porcelain tiles
  • clinker tiles
  • terracotta

Surface Preparation:

Thoroughly clean the painted surface from dust, dirt, and residues of old coatings.

Apply to clean, dry, and degreased surfaces.

It is recommended to sand the surface with sandpaper and then dust it off to achieve proper paint adhesion.

Any defects in tiles and grouts should be filled with suitable fillers.

It is recommended to remove silicone grouts before painting and apply new ones after finishing painting.

In areas particularly exposed to prolonged water exposure, such as bathrooms near tubs/showers, it is permissible to apply a primer or a special tile undercoat before painting.

Application Method:

Just before painting, add component B to component A and mix thoroughly until a homogeneous mixture is obtained – use within 2 hours.

Apply the first coat using a roller/brush dedicated to tile painting or by spraying and allow it to dry – drying time is approximately 8 hours.

Just before applying the second coat, add component B to component A and mix thoroughly until a homogeneous mixture is obtained – use within 2 hours.

Apply the second coat using a roller/brush suitable for varnishes or by spraying and allow it to dry – drying time is approximately 8 hours.

Just before applying a potential third coat, add component B to component A and mix thoroughly until a homogeneous mixture is obtained – use within 2 hours.

Apply the third coat using a roller/brush suitable for varnishes or by spraying and allow it to dry – drying time is approximately 8 hours.

Initial strength – 24 hours. Full strength – 15 days during which the surface should be protected from impacts, staining, and cleaning.

Efficiency:

10-11 m²/liter with a single coat (coverage depends on the absorbency and type of substrate, as well as the application method).

White 

Black 

Delicate beige

Ashen grey 

Anthracite depth

Need other materials? Contact us!